In the Detail Engineering phase, our engineers are responsible for generating the information package that establishes the specifications to execute the project´s construction, as well as the acquisition of Equipment, Instruments and Materials. In this phase, Vepica carries out the following activities, according to the area:
Processes:
- Design Basis (updated from FEED)
- Process Flow Diagram (PFD)
- Heat & Mass Balance
- Piping & Instrument Diagrams (P&IDs) (Issued for Construction)
- Line List
- Equipment List (includes missing data such as vendor information)
- Final Line Sizing and Hydraulic Report based on Piping Isometrics
- Updated Operating, Control and Safeguarding Philosophy
- Commissioning Procedure & Plan
- Plant Operating Manual
Equipment:
- Design Basis (support)
- General Specifications
- Piping and Instrumentation Diagram (support)
- Identification of regulatory requirements and permits
- Engineering Drawings Tanks and Vessels
- Tanks and Vessels Requisitions
- Technical Bid Evaluation - Tanks and Vessels
- Vendor Documents Review - Tanks and Vessels
- Calculation Report - Tanks and Vessels
- Rotary Equipment Data Sheets
- Rotary Equipment Requisitions
- Technical Bid Evaluation - Rotary Equipment
- Vendor Documents Review - Rotary Equipment
- Calculation Report - Rotary Equipment
- Heat Transfer Equipment Data Sheets
- Manufacturing Drawings Heat Transfer Equipment
- Engineering Drawings Heat Transfer Equipment
- Heat Transfer Equipment Requisition
- Technical Bid Evaluation - Heat Transfer Equipment
- Vendor Documents Review - Heat Transfer
- Calculation Report - Heat Transfer Equipment
- Solids Handling Equipment Drawings
- Solids Handling Equipment Data Sheets
- Solids Handling Equipment Requisition
- Technical Bid Evaluation - Solids Handling Equipment
- Vendor Documents Review - Solids Handling Equipment
- Calculation Report - Solids Handling Equipment
- Air Conditioning and Ventilation Equipment Plot Plan
- One Line Drawings of Ducts of Air Conditioning and ventilation
- Detail Drawings of Ducts of Air Conditioning and Ventilation
- Air Conditioning and Ventilation Standards
- Air Conditioning and Ventilation Equipment Data Sheets
- Air Conditioning and Ventilation Equipment Requisition
- Drawing of ducts, piping and instrumentation - Air Conditioning and Ventilation Equipment
- Technical Bid Evaluation - Air Conditioning and Ventilation Equipment
- Chilled water / refrigerant piping drawings
- Chilled water / refrigerant piping Isometrics
- Vendor Documents Review - Air Conditioning and Ventilation
- Calculation Report - Air Conditioning and Ventilation Equipment
- Package Units and Miscellaneous Equipment Data Sheets
- Package Units and Miscellaneous Equipment Requisition
- Technical Bid Evaluation - Package Units and Miscellaneous Equipment
- Vendor Documents Review - Package Units and Miscellaneous Equipment
- Equipment Boiler and Furnace Equipment Data Sheets
- Boiler and Furnace Equipment Requisition
- Technical Bid Evaluation - Boiler and Furnace Equipment
- Vendor Documents Review - Boiler and Furnace equipment
- 3D Model General
- HVAC Equipment modeling
- Duct of HVAC modeling
- Piping of HVAC / Refrigerant modeling
- HVAC Piping supports modeling
- Multidisciplinary 3D Model review
- Post-review 3D Model comments incorporating
- Clash detection and resolution
- 3D Model customer review
Piping:
- Construction specifications
- Implantation Equipment Plant
- Model 3D
- Piping Layouts
- Piping isometrics
- Piping supports
- Detail Piping & Instrument Diagrams (P&IDs)- Firefighting System
- Calculation report- Firefighting System
- Material Take off
- Bill of Material
- Stress Analysis studies
- Piping requisitions
- Construction Package
- Steam Tracing Documents
- Technical Bid Evaluation
- Vendor Documents Review
Instrumentation:
- Technical Review of Customer Information
- Site Survey
- Design Basis (support)
- Design Criteria (support)
- Control and Operation Criteria (support)
- Piping and Instrumentation Diagram
- Scope of Construction Work Items
- Bill of Quantities
- Material Take Off (MTO)
- Material, Systems and Equipment Requisition
- Technical Bid Evaluation
- Vendor Documents Review
- Risk and Safety Studies Specification / Follow-up
- Instrumentation Systems Specifications
- Block Diagram and / or Control Systems Architectures
- Instrumentation Index
- Field Instruments Data Sheets
- Inline Instruments Data Sheets
- Analyzers Data Sheets
- Instruments Location and Pneumatic signals routes
- Instruments Location and Electrical cable routes
- Equipment Location and Control Cables Routes in Buildings
- Detection and Alarm Devices Location and Cable routes - Exterior
- Detection and Alarm Devices Location and Cable routes - Buildings
- Main Cables Routes
- Cables / Reel List
- Signal List
- Installation Details
- Loop Diagrams
Electrical:
- Initial Activities
- Coordination and Follow-up
- Site Survey
- General Specifications
- Design Criteria (support)
- Scope of Construction Work Items
- Bill of Quantities
- Material Take Off (MTO)
- Symbology (drawings/plans)
- Equipment List
- Cables List
- Materials and Equipment Requisition
- Technical Bid Evaluation
- Vendor Documents Review
- One Line Diagram
- Electrical Studies
- Calculation Report
- Feeder Calculation Report
- Lighting Calculations Report
- General Plot Plan / Equipment Plot Plan (support)
- BID Packages (support)
- Mechanical Catalog
- Commissioning and Start-up Manual (support)
- Field Engineering
- "As built" Documents (drawings/plans)
- Technical Audits
- Diagram Scheme Protections System
- Grounding System Drawings (electrical substations)
- Coordination and Setting Protections System
- Load Analysis
- Area Classification
- Electrical Equipment Data Sheets
- Grounding System
- Protection Coordination Study
- 3D Model General
- Aboveground Routing
- Underground Routing
- Cables trays ≥ 300mm width
- Multidisciplinary 3D Model review
- Post-review 3D Model comments incorporating
- Clash detection and resolution
- 3D Model customer review
Civil:
- Design Basis
- Design Criteria
- Construction Specifications
- Field Information Survey
- Constructibility Study
- Foundations of structures / buildings / equipment (geometry plans, sections, details, reinforcement steel assembly tables)
- Modified topography (plant plans / sections / details)
- Roads (floor plans / longitudinal profiles / cross sections / details)
- Pavements (plant plans / details)
- Rainwater systems (plant plans / details)
- Contaminated water systems (plant plans / details)
- Drinking water distribution systems (plant plans / isometries / details)
- Wastewater collection system (plant plans / isometries / details
- Architecture (floor plans, facades, sections, restroom details, windows, doors, finishes)
- Concrete Structures (formwork plans / reinforcement steel assembly tables / anchors / details)
- Steel structures (floor plans and elevations / connection details)
- Metric calculations
- Materiales List
- Calculation Memories
- Cost Estimation Support
- Tender Package Support
- Development of 3D Models
To find out more about our projects and the services we offer, contact: andres.pulido@vepica.com
