In the basic engineering phase, Vepica’s engineers establish the equipment that will be required for the installation or plant, define the bases for the elaboration of the Detailed Engineering and obtain an estimated cost.
Activities offered by Vepica in the different areas of the design phase include:
Processes:
- Basis of Design
- Process Design Criteria
- Process Flow Diagrams (PFDs)
- Process Description
- Process Simulation
- Heat and Material Balance
- Piping & Instrument Diagrams (P & IDs)
- Line List
- Tie-in List
- Equipment List
- Equipment Process Datasheets
- Instrument Datasheets
- Operating, Control & Safeguarding Philosophy
- Line Sizing & Hydraulic Report
- Equipment Sizing Report
- Material Selection Report
- Utility Requirements
- Chemical
- Relief Valve Sizing and Dossier
- Flare System and depressurization study
- Shutdown Key
- HAZID Review & HAZID Report
- HAZOP / SIL Studies Participation
Equipment:
- Design Basis (support)
- Design Criteria (support)
- Piping and Instrumentation Diagram (support)
- Calculation Report - Tanks and Vessels
- Rotary Equipment Specifications
- Rotary Equipment Data Sheets
- Calculation Report - Rotary Equipment
- Heat Transfer Equipment Specifications
- Heat Transfer Equipment Data Sheets
- Calculation Report - Heat Transfer Equipment
- Solids Handling Equipment Specifications
- Solids Handling Equipment Data Sheets
- Calculation Report - Solids Handling Equipment
- Air Conditioning and Ventilation Equipment Specifications
- Air Conditioning and Ventilation Equipment Plot Plan
- One Line Drawings of Ducts of Air Conditioning and Ventilation
- Air Conditioning and Ventilation Equipment Data Sheets
- Drawing of ducts, piping and instrumentation - Air Conditioning and Ventilation Equipment
- Operation Philosophy - Air Conditioning and Ventilation Equipment
- Calculation Report - Air Conditioning and Ventilation Equipment
- Specifications of Package Units and Miscellaneous Equipment
- Package Units and Miscellaneous Equipment Data Sheets
- Boiler and Furnace Equipment Specifications
- 3D Model General - Equipment
- HVAC Equipment modeling
- Duct of HVAC modeling
- Clash detection and resolution
Electricity:
- Initial Activities
- Coordination and Follow-up
- Site Survey
- Design Basis (support)
- General Specifications
- Material Take Off (MTO)
- Symbology (drawings / plans)
- Equipment List
- Materials and Equipment Requisition
- One Line Diagram
- Electrical Studies
- Calculation Report
- Feeder Calculation Report
- General Plot Plan / Equipment Plot Plan (support)
- Cost Estimation (support)
- Technical Audits
- Descriptive Memory (support)
- General Arrangement of Equipment
- Insulation Strings 115 or 230 kV
- Control Panel Plan and Elevation Layout
- Grounding System Drawings (electrical substations)
- Load Analysis
- Electrical Equipment Layout
- Electrical Equipment Data Sheets
- Grounding System
- Lightning Protection Systems
- Cathodic Protection
- Route Study
- Aboveground Lines Conduits Calculations
- Insulator strings
- Material and data base specifications
- Electrical Equipment Layout
- Equipment List
- Panelboard Load tables and external connection boxes
- Road lighting and outdoor areas
- Lighting process and service areas
- Interior electrical panels
- Interior lighting in buildings
- Multidisciplinary 3D Model review
Piping:
- Piping Design Criteria
- Design specifications
- Piping material Specification
- General Plot Plan
- Piping Layouts
- Piping & Instrument Diagrams (P & IDs) - Firefighting System
- Firefighting System Specifications
- Calculation report- Firefighting System
- Support to Cost Estimates II
- Support to Construction Strategy
- 3D Model
Civil:
- Design Bases
- Design principles
- Construction Specifications
- Specifications for Sub-contracting Special Studies
- Field Information Survey
- Constructibility Study
- Predimensioning foundations (structures / buildings / equipment)
- Modified topography (plans of plants / sections)
- Roads (plant plans / longitudinal profiles)
- Floors (floor plans)
- Rainwater systems (plant plans)
- Contaminated water systems (floor plans)
- Drinking water distribution systems (floor plans)
- Sewage collection system (plant plans)
- Architecture (floor plans, facades, sections)
- Concrete Structures (formwork plans)
- Steel structures (floor plans and elevations)
- Metric calculations
- Lists of Materials
- Memories of calculation
- Support for Cost Estimation
- Support for Tender Packages
- Development of 3D Models
Instrumentation:
- Technical Review of Customer Information
- Site Survey
- Design Basis (support)
- Design Criteria (support)
- Piping and Instrumentation Diagram (support)
- Scope of Construction Work Items
- Bill of Quantities
- Material Take Off (MTO)
- List of Equipment and Systems
For more information about our services: 
